Black Fireplace Firebox Paint

$27.99

In stock

Free Shipping

On Orders Over $199

Money Back Guarantee

No hassle money back

Brick Anew’s black firebox paint is formulated to withstand temperatures as high as 1200°F without cracking, peeling, or blistering. Our 16oz can of firebox paint conceals everything from creosote to soot stains, providing the perfect backdrop for your fire. There are many great uses for firebox paint, check out our Brick-Anew Paint Colors for more! This paint will restore the beauty of your old stove or grill, or bring a great look to a new project. Use with confidence that your paint will look great for years to come all while keeping rust at bay.

If you are looking for other fireplace painting ideas to transform your old brick fireplace, we also offer our custom brick fireplace paint.

  • Adheres to steel, cast iron, aluminum, brick
  • Great for grills, stoves, smokers, stove pipes, or chimney caps
  • No primer needed
  • Available in flat black
  • See Data & Information Tab below
  • Unavailable to California Residents (prop.65)

Overview

Make Your Firebox Look Brand New with High-Temperature Fireplace Firebox Paint by Brick Anew!

Your firebox takes the heat - and suffers some of the most extensive damage from smoke and accumulated soot. Our 16oz can of black firebox paint conceals everything from creosote to soot stains, providing the perfect backdrop for your fire. Black Firebox Paint is a heat resistant paint, formulated to withstand temperatures as high as 1200 degrees without cracking, peeling, or blistering.

RUTLAND 1200°F Hi-Temp Flat Black Brush-On Paint is specially formulated to resist peeling and blistering in temperatures up to 1200°F. Renews the finish on natural cast iron, grills, ovens, or cookers – anywhere a high-temperature-resistant, flat black coating is needed. This quality high heat paint paint is great for grills, stoves, smokers, stove pipes, fireplace inserts, furnaces, barbecues, mailboxes, lampposts, fireplace tools, brass, firebrick, and chimney caps. Use with confidence that your paint will look great for years to come all while keeping rust at bay.

  • 16 fl oz Can
  • Flat black
  • Contains no lead, fluorocarbons, or vinyl chloride
  • No primer needed
  • 1 year UV resistance after application
  • Fast drying and color-fast
  • Non-toxic when dry
  • Weather- and heat-resistant
  • At least two layers are recommended
  • Heat cure is not required for two layers, but best results are obtained after heat curing
  • Not for direct food contact
  • Indoor and outdoor use
  • Adheres to steel, cast iron, aluminum, brick
  • Great for grills, stoves, smokers, stove pipes, or chimney caps
  • No primer needed
  • Available in flat black

Can be used to paint the inside of a masonry firebox

WARNING: This product can expose you to chemicals including Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

RUTLAND 81SDS

    Wear protective gloves and eyewear. Prepare surface by removing all loose, scaly material and sanding rusty spots with fine sandpaper. Remove any polish or wax with lacquer thinner. DO NOT THIN PAINT. Stir paint until uniform throughout.

Brush on COLD SURFACE. FIRE MUST BE COMPLETELY OUT. At least 2 layers of paint are recommended. For best results, allow paint to air-dry for 24 hours, then heat cure to 500°F. Be sure all paint is dry before re-firing. Provide ventilation when firing for the first time after painting. Some smoke and odors are given off during this process.
Heat cure is recommended for best results. For 3+ layers, heat cure is required.
For more information on this product you can contact Rutland at:

Rutland Customer Service
1430 Environ Way
Chapel Hill, NC 27517
Phone: 800-544-1307
Fax: 802-775-5262
sales@rutland.com

Customer Feedback

Customer Reviews

Based on 11 reviews
91%
(10)
9%
(1)
0%
(0)
0%
(0)
0%
(0)
M
Michelle Winslow
Fireplace Facelift

I am very happy with this product. It does have a very strong smell, so ventilation when painting is a must. The inside of our gas fireplace was a dull off white color, which made the overall look unattractive. After painting the interior, our fireplace looks so much more sophisticated!

v
viktori Segal

Good coverage, with two smaller cans we painted 3 fireplaces. Looks great.

M
Michael P.

This is an awesome product. However, be prepared for several coats of the product. It’s as thin as water. I have red brick and it’s soaked up the first coat instantly. After the first two coats, the red brick still had a purple sheen. It took two additional coats (a total of 4 coats) to achieve a perfect flat black. Still, The end result is absolutely awesome.

M
Michael P.

I have red brick, it took 3 coats to fully cover the red color. You might inform buyer that it’s very thin (watery) and the brick will soak up the first coat. Otherwise, I am very pleased with the end result.

J
Julie Edwards

I painted the inside of our firebox after having the fireplace tiled. I followed the advice of others' reviews online: I bought a respirator and I planned to use an old brush and throw it out when I was done. I didn't even notice the odor while I was working because of the respirator, and it does seem to dry very quickly so the odor dissipates fast. The paint coverage was good, though I could have used maybe 1/3 of another can. (I tried to use a roller, but it just SOAKED up the paint and then didn't put any down on the brick, so I went back to the brush and was sad that I'd lost the paint in the roller.) The inside of our firebox seemed to be a mix of different types of material; some was red brick, some was probably cinder block. The two materials took the paint very differently; the brick took the paint beautifully and the block needed more coverage. It is very black and looks great, I'm glad I used this product and I would use it again.