Empire Burning Embers Set

How to measure for gas logs

Three choices for ignition: Match light, Pilot, Remote Control

Starting with Match: Light your match, turn your gas valve to the full open position, and hold the match on the side the gas enters on.  The burner should ignite.  If it doesn’t, turn the gas off and repeat the process.  If it doesn’t light again, contact your gas supplier.

Starting with Manual Pilot: Use your valve to turn the gas completely on.  Turn the knob from OFF to PILOT.  Depress the knob and push the ignitor to start the pilot light; keep the knob depressed for 45 seconds.  When you release, the pilot should be lit; if it’s not, turn the knob to OFF and repeat the process.  If it doesn’t light again, contact your gas supplier.  Turn the knob from PILOT to one of the flame settings to start the fire.

Starting with Remote Control: Use your valve to turn the gas completely on.  Ensure that you’ve set up the remote according to the manufacturer’s instructions.  You may need to light the pilot manually, but from there you can start, stop, and control the height of your flames with your remote.  (To light the pilot manually, turn the knob from OFF to PILOT.  Depress the knob and push the ignitor to start the pilot light; keep the knob depressed for 45 seconds.  When you release, the pilot should be lit; if it’s not, turn the knob to OFF and repeat the process.  If it doesn’t light again, contact your gas supplier.)

All burners that have either a standing pilot or remote with pilot, will be 3” shorter than the gas logs. This will accommodate the pilot assembly. Example if you order the 24” gas log kit  with a remote ready pilot, this will come with 24” logs and a 21” burner assembly.

The logs are richly detailed and hand painted with real logs as models.  The efficient burner system is just pennies to operate, and the whole set is made in the USA.